NUPROL POWER
The batteries found in Nuprols “NP POWER” range have been specifically designed to support the hobby-enthusiast sectors that include Airsoft, RC Models & UAVs.
 
With well over 100 variants in the range from small 300mAh HPA batteries through to the massive multi-rotor UAV 16,000mAh power houses, all batteries utilise modern battery-cell technology and undergo excessive quality-control checks to deliver first-class performance time and again.
 
High Quality Silicone Leads
Modern Battery Cell Technology
ISO 9000 Quality Control Manufacturing Facility
Shipped at optimal charge of ≥60%
 
LIPO – LITHIUM POLYMER
Lithium Polymer batteries have established themselves as the go-to battery chemistry for the modern hobbyist industries. LiPo batteries have a very high energy density, meaning more stored energy vs its size/ weight. This allows for more powerful batteries with long charge times able to be fitted to models/ replicas where space & weight are at a premium.
 
The lightest rechargeable battery technology vs its capacity
Very High discharge rates for devices requiring rapid bursts of energy
A low self-discharge rate when in storage (approx. 5-10% per month)
Fast recharge times
 
NOTE: LiPo batteries must be treated with care and attention. Any damage can cause the battery cells to swell/ overheat and must be disposed of. Special care must be taken when storing & charging LiPo batteries – always use a Fire Retardant Charging Bag when charging and for long-term storage.
 
LiPo Safe Use Warning
WARNING – Strict instructions must be followed to ensure the safe use of Lithium-Polymer Cell batteries.
 
Use a LiPo Balance Charger ONLY!
Ensure the Balance Lead is connected when charging.
Always use a Fire-Retardant LiPo Charging Bag when Charging Battery.
Never leave LiPo Batteries charging unattended.
Always check cell voltages before and after charging - Minimum Cell Voltage (3.3v), Maximum Cell Voltage (4.2v).
Maximum Charing Current of 3C.
In the event that Battery Cells show signs of swelling/ expansion or the surface temperature is in excess of 70°c you must disconnect and stop using the battery. Failure to comply may result in the rapid venting of the battery cells which can lead to fire and explosions.